CUSTOM MADE - CONFIGURATOR
More Articles
5. Do you still need western reins, bits or curb chains?
Here you will find a selection of additional items for your Custom Made setup as well as for training and tournaments. The selection also includes boots, bell boots, stirrups, breastplates and coolers.
"ARENA MASTERS" bell boots
Arena Masters bell boots. Made from soft yet shock absorbing neoprene. The Velcro fasteners are double secured. The black hoof bells are easy to clean and offer all-round protection for training and tournaments.
"ARENA MASTERS" boots
The Arena Masters boots offer a perfect fit and freedom of movement with a well-fitting "snug-fit" design. Made from soft yet shock absorbing neoprene. The Velcro fasteners are double secured. The boots are easy to clean and offer all-round protection for training and tournaments.
"WEAVER" reins 1/2" harness leather - Horizon, golden brown
High quality 1/2" wide western reins made of US harness leather by WEAVER from the Horizon series in golden brown, light. Very soft and light split reins. The leather reins are very comfortable to hold and the bits are attached with a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" reins 1/2" harness leather - Horizon, sunset
High-quality 1/2" wide western reins made of US harness leather by WEAVER from the Horizon series in sunset, medium brown. Very soft split reins. The leather reins are very comfortable to hold and the bits are attached with a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" reins 1/2" harness leather - ProTack
High-quality 1/2" wide western reins made of US harness leather by WEAVER from the Pro Tack series. Very soft and already oiled split reins with slightly heavier ends. The leather reins are very comfortable to hold and the Bits are attached using a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" reins 1/2" harness leather - single ply
High-quality 1/2" wide western reins made of US harness leather by WEAVER from the Single Ply series in light. Very soft and light colored split reins with slightly heavier ends. The leather reins are very comfortable to hold and the bits are soft fastened with a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" Reins 1/2" Harness Leather - Working Tack
High-quality 1/2" wide western reins made from US harness leather by WEAVER from the Working Tack series. Very soft and already oiled split reins with heavier ends. The leather reins are very comfortable to hold and the Bits are attached using a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" reins 5/8" harness leather - ProTack
High-quality 5/8" wide western reins made of US harness leather by WEAVER from the Pro Tack series. Very soft and already oiled split reins with slightly heavier ends. The leather reins are very comfortable to hold and the Bits are attached using a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" reins 5/8" harness leather - single ply
High-quality 5/8" wide western reins made from US harness leather by WEAVER from the Single Ply series in light. Very soft and light colored split reins with slightly heavier ends fastened with a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
"WEAVER" Reins 5/8" Harness Leather - Working Tack
High-quality 5/8" wide western reins made of US harness leather by WEAVER from the Working Tack series. Very soft and already oiled split reins with slightly heavier ends. The leather reins are very comfortable to hold and the bits are attached using a water loop fastener. Rein length: 8 ft long corresponds to approx. 240 cm
Aluminium stirrups, engraved
Engraved aluminum stirrups from Pro Stuff. High-quality leather tread (laced at the bottom) and leather protectors at the top. Depth of tread (bar): 2" = approx. 5 cm Width to accommodate the fender strap (top): 3" = approx. 7.6 cm
Baby correction bit pro-roller, short shanks
Correction bit with short shanks (baby shanks) and round port made of stainless steel and with copper rollers, which increase the horse's chewing activity. Pro-roller correction mouthpiece from Pro Stuff. Mild impact due to the short shanks.Cheek length = approx 155 mm.
Baby correction bit pro-roller, short wide shanks
Correction bit with short shanks (baby shanks) made of stainless steel with copper rollers, which increase the horse's chewing activity. Pro-roller correction mouthpiece from Pro Stuff. Mild impact due to the short shanks.Cheek length = ca. 155 mm.
Bell boots reinforced with canvas
Bell boots by Cattlemans/GVR. Soft yet shock-absorbing neoprene inside and in the upper area. Reinforced with canvas at the bottom for greater durability. The Velcro fasteners are double secured. The bell boots are easy to clean and offer all-round protection for training and tournaments. The bell boots are slightly smaller
Bell boots with a wool trim
Bell boots with soft wool trim on top by Cattlemans/GVR. Soft yet shock-absorbing neoprene. The Velcro fasteners are double secured. The bell boots are easy to clean and offer all-round protection for training and tournaments.
Billy Allen bit with copper inlays, long shanks
Billy Allen bit in mirror polished stainless steel with copper inlays and long shanks by Pro Stuff.Cheek length = approx 225 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Billy Allen bit with copper inlays, medium shanks
Billy Allen bit in mirror polished stainless steel with copper inlays and medium shanks by Pro Stuff.Cheek length = approx 180 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Billy Allen bit, matte finish with copper inlays, long shanks
Billy Allen bit, matte finish in stainless steel with copper inlays and long shanks by Pro Stuff.Cheek length = approx 205 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Billy Allen d-ring snaffle bit brown with copper inlays
D-Ring Snaffle Bit Billy Allen made of brown steel steel with copper inlays from Pro Stuff. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Billy Allen d-ring snaffle bit with copper inlays
D-Ring Snaffle Bit Billy Allen with shiny polished stainless steel with copper inlays from Pro Stuff. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Bit cathedral, gravierte long Shanks
Show Bit cathedral made of shiny polished stainless steel without copper inlays and with engraved long aluminum shanks from Pro Stuff.Cheek length = approx 220 mm.
Bit flat spoon black steel with silver trim, long s-shanks
Black steel bit with a flat spoon mouthpiece, copper inlays, and silver-plated trim on the S-shaped shanks by Pro Stuff.Cheek length = approx. 205 mm.
Bit flat spoon brown steel dots, long shanks
Bit brown steel with flat spoon mouthpiece, copper rollers, dots and silver-plated, engraved trim on the shanks from Pro Stuff.Cheek length = approx 205 mm.
Breastplate basket tooling
Leather breastplate with basket tooling, double stitched with stainless steel hardware from Cattlemans/GVR. Standard size for Quarter Horses and similar horses. Width: 1.5"