Everything around the head
Halters & Ropes, Headstalls, Bits, Reins and much more
Bull snap with swivel from stainless steel
The Cattlemans/GVR bull snap is a stainless steel snap hook with a round swivel. It is supplied as an individual hardware component or replacement part for equipment that requires this type of fitting. The round swivel measures 1 inch, while the overall length of the snap is approximately 10.5 cm. This model combines a snap hook with a round swivel rather than a fixed attachment eye. When selecting a replacement or an additional fitting, check both measurements against the intended attachment point. The overall length and the size of the swivel are separate dimensions, and both are relevant when checking whether the component is suitable for the existing equipment. The bull snap is made of stainless steel and supplied individually as one piece. It is manufactured by Cattlemans/GVR. Manufacturer: Cattlemans/GVR. Product type: Bull snap with swivel. Material: Stainless steel. Swivel: Round, 1 inch. Overall length: Approx. 10.5 cm. Package contents: 1 piece.
Carrying bag, bridle case for headstalls
Carry 2 to 3 complete Western headstalls, including bits and reins, in this Cattlemans/GVR bridle bag. The zipper keeps the bag closed, while the shoulder strap makes it easier to carry your tack. The bag also helps protect your headstalls from dirt, making it useful when travelling to shows, transporting equipment in a horse trailer or storing your tack between rides. Capacity: Holds 2 to 3 complete headstalls, including bits and reins. Zipper: Allows you to open and close the bag when packing or taking out your equipment. Shoulder strap: Makes the bag easier to carry. Protection from dirt: Helps keep your headstalls clean during transport and storage. Dimensions: 36 cm wide, 70 cm long and 12 cm deep. Colours: Black, blue and red. The bag is designed for Western headstalls and provides space for several complete sets. Before packing, check that your equipment, including bits and reins, fits comfortably inside. Choose the colour that suits your other tack or simply matches your preference. The carrying bag is supplied as one piece.
Carrying bag, bridle case for headstalls, diamond
The Cattlemans/GVR bridle bag holds two to three complete Western headstalls, including bits and reins, and helps protect your tack from dirt. Its quilted diamond pattern gives the bag its distinctive look. A practical zipper keeps the bag closed, while the shoulder strap makes it easier to carry when travelling to a show or taking your headstalls to another location. It is designed to store and transport several complete sets of headstall equipment in one bag. Capacity: 2 to 3 complete headstalls, including bits and reins Pattern: quilted diamond pattern Closure: zipper Carrying option: shoulder strap Dimensions: 22 cm wide, 63 cm long and 12 cm deep Colours: black and chocolate The bag is useful for keeping your headstalls together during storage and transport, with protection against dirt. At 63 cm long, it is designed to accommodate two to three complete headstalls with their bits and reins. Before closing the zipper, arrange your tack so that no parts are trapped. The Cattlemans/GVR bridle bag is available in black or chocolate. Its listed dimensions are 22 × 63 × 12 cm.
Compact snap hook made of steel
The Cattlemans/GVR steel snap hook is a small connecting component for attaching and detaching compatible equipment. Measuring approximately 5 cm in length, it is intended for situations where a compact snap hook is required and its dimensions suit the fastening point. The hook is made of steel. It should only be selected for applications where its size and rated suitability meet the requirements. The snap mechanism allows two compatible parts to be connected in a removable way. A snap hook of this type can, for example, serve as a connector on suitable horse tack. The actual application depends on the construction of the equipment and the forces involved. Manufacturer: Cattlemans/GVR Product type: Snap hook Material: Steel Length: Approx. 5 cm Design: Small and compact Package contents: 1 snap hook Before use, compare the approximate 5 cm length with the corresponding attachment point and check that the shape and fastening mechanism are suitable for the intended connection.
Flat nylon lunge with hand loop
This flat nylon lunge line with a hand loop is designed for lunging your horse. It is made from soft nylon webbing, has a flat profile and comes in black. A hand loop at one end helps you hold the line, while the hook is interchangeable and can be replaced when needed. The total length is approximately 8.5 metres, providing the specified length for working with your horse from the ground. Material: soft nylon webbing Shape: flat webbing Colour: black Handling: with hand loop Hook: interchangeable Total length: approx. 8.5 m The flat webbing and hand loop make this a straightforward option for lunging. The lunge line is supplied in black and measures approximately 8.5 metres in total. One lunge line is included. If you need a replacement hook, note that the hook is described as interchangeable.
Keychain sunburst tooling
The Cattlemans/GVR Sunburst tooling keychain combines a leather concho with a keychain. The leather is from Wickett & Craig, and the Sunburst tooling gives the leather concho its distinctive appearance. You can choose from five leather colours: russet, chestnut, dark chestnut, brown and black. This gives you several options for coordinating the keychain with other western leather accessories. The leather concho can be embellished or enhanced with an additional crystal or silver concho. Cattlemans/GVR recommends a concho size of 1.5 inches. This provides a size reference when selecting an additional decorative concho. Crystal and silver conchos are mentioned as optional additions, but they are not listed as part of the included contents. Manufacturer: Cattlemans/GVR Product type: Keychain with leather concho Leather: Wickett & Craig Decoration: Sunburst tooling Leather colours: Russet, Chestnut, Dark Chestnut, Brown, Black Recommended concho size: 1.5 inches Material: Leather Package contents: 1 piece
Leather rein straps basket tooling
These leather rein straps by Cattlemans/GVR let you update the look of your Western reins and replace existing waterloop ends. They feature classic basket tooling and a hole for attaching a concho. Add a matching concho to personalise your rein setup, whether you are putting together a show outfit or choosing a distinctive look for leisure riding. The rein straps are made from leather and measure 22 cm in total length. Brand: Cattlemans/GVR. Design: leather rein straps with basket tooling. Concho attachment: hole provided for attaching a concho. Recommended concho diameter: 1.5 inches. Total length: 22 cm. Leather colours: russet, chestnut, dark chestnut and brown. Package contents: 1 pair. These rein straps are intended to replace existing waterloop ends. When fitting them, check that the connection is suitable for your reins. A concho is not listed as part of the package contents, so choose one that matches the intended opening.
Leather rein straps flower tooling
These leather rein straps by Cattlemans/GVR replace existing waterloop ends and add a decorative flower-tooling detail to your Western reins. Supplied as one pair, they let you update the look of your reins without replacing the complete set. The rein straps are made from leather and measure 22 cm in total length. Four leather colours are available: russet, chestnut, dark chestnut and brown. If you want to add a concho, a version with a mounting hole can be requested. The recommended concho diameter is 1.5 inches; the concho itself is not listed as part of the package contents. Style: Leather rein straps with flower tooling Function: Replacement for existing waterloop ends Total length: 22 cm Leather colours: Russet, chestnut, dark chestnut and brown Concho: Mounting hole available on request; recommended diameter 1.5 inches Package contents: 1 pair Manufacturer: Cattlemans/GVR The floral tooling coordinates with Western tack for leisure riding or a matching show setup. Before fitting, check that the straps are compatible with your existing reins. They offer a way to replace the end pieces and change the appearance of your equipment without changing the full reins.
Liquid Glycerine Saddle Soap
Fiebing's Liquid Glycerine Saddle Soap is designed to clean and protect smooth leather. It is intended for saddlery, including saddles and other leather tack, as well as leather goods, but it is not suitable for suede. The liquid soap is sprayed onto the leather and worked in with a cloth. According to the product description, the result is visible immediately and leaves the leather with a rich, shiny finish. This glycerine saddle soap combines leather cleaning with care and preservation. Its stated area of use includes smooth leather and other types of leather, with suede specifically excluded. Check the leather type before use so the product is only applied to suitable material. Two bottle sizes are available: 473 ml and 946 ml. Both options belong to the same product and differ in the amount supplied. Always read the label and product information before use. The hazard warnings and safety instructions listed on the product page also apply and should be followed. Manufacturer: Fiebing's Product type: Liquid glycerine saddle soap Purpose: Cleaning, care and protection of leather Suitable for: Smooth leather and saddlery Not suitable for: Suede Application: Spray on and work in with a cloth Finish: Rich, shiny finish Volume: 473 ml, 946 ml
Nylon bit hooble for western bits
The Cattlemans/GVR nylon bit hobble holds the ends of a bit’s cheek pieces together. It is a small connecting piece for a bit and keeps the two cheek-piece ends joined. This provides a simple connection between the ends of the cheek pieces without requiring a wide or bulky strap to pass through the end of the bit. The material is nylon. Its design is deliberately thin, allowing it to fit easily through the bit end. This slim construction is a stated feature of the item. You can choose between black and chocolate. The item is sold individually, with one piece included per unit. You can therefore select the quantity you need when ordering. The nylon bit hobble is described as a connector that holds the ends of the cheek pieces together and is intended as an additional component for your bit setup. Manufacturer: Cattlemans/GVR Product type: Nylon bit hobble Function: Holds the ends of the bit’s cheek pieces together Material: Nylon Construction: Thin, fits easily through the bit end Colours: Black, chocolate Contents: 1 piece
Prime Neatsfoot Oil Compound
Fiebing's Prime Neatsfoot Oil Compound is designed to condition and protect leather. It combines high-quality neatsfoot oil with other nourishing oils that help replenish fats lost from the leather over time. The compound helps revitalize older leather, maintain its suppleness and protect the surface. It also supports the longevity of the material. The oil is suitable for smooth leather and leather items such as saddles, boots and headstalls. Clean the leather before application, then distribute the oil evenly and allow it to soak in. Finally, wipe the surface with a soft, dry cloth. There are two important points to consider before use: light-colored leather may darken after treatment, and the product is not suitable for suede. Check the leather type and color before applying the oil. Fiebing's Prime Neatsfoot Oil Compound is available in two bottle sizes, 473 ml and 946 ml. Both options contain the same leather-care compound and differ only in the amount supplied. Manufacturer: Fiebing's Product type: Prime Neatsfoot Oil Compound Composition: Neatsfoot oil and other nourishing oils Purpose: Leather conditioning, replenishing lost fats and surface protection Suitable for: Smooth leather and leather goods Not suitable for: Suede Important note: Light-colored leather may darken Volume: 473 ml, 946 ml
Rein straps from Sadesa leather
These Sadesa leather rein straps by Cattlemans/GVR are replacement parts for Western reins with waterloop ends. They are supplied as a pair and have a slot for threading the reins through. The straps let you replace the existing leather connectors without necessarily replacing the complete pair of reins. The listed material is Sadesa leather. These are individual tack components, so the key detail when choosing them is whether your existing reins use the waterloop-end connection described on the product page. The manufacturer is Cattlemans/GVR. Product type: replacement leather rein straps. Material: Sadesa leather. Attachment: slot for threading reins with waterloop ends. Package contents: one pair. Manufacturer: Cattlemans/GVR. Please note that the product consists of the rein straps only, not a complete pair of Western reins. Before replacing your existing straps, check that your reins have the waterloop-end connection specified.
Rein straps two tone combo tooling
These two-tone leather rein straps by Cattlemans/GVR let you replace the existing waterloop ends on your Western reins and give them a different look. The design combines flower and basket tooling. Their two-tone finish adds a decorative detail at the rein ends and can be coordinated with the rest of your Western tack. The straps measure 22 cm in total length and are supplied as one pair. They are replacement connectors for existing waterloop ends, not a complete pair of reins. A hole for attaching a concho is available on request. The recommended concho diameter is 1.5 inches. The concho itself is not listed as part of the package contents. Manufacturer: Cattlemans/GVR Design: Two-tone leather rein straps with flower and basket tooling Total length: 22 cm Leather colours: Russet and black Concho: Mounting hole available on request; recommended diameter 1.5 inches Package contents: 1 pair of rein straps
Rein straps with straight backside basket tooling
These Cattlemans/GVR rein straps replace existing waterloop ends on Western reins and give the rein ends a different look. They have a straight backside and feature classic basket tooling. A hole is provided for attaching a concho, so you can coordinate the rein connectors with the rest of your tack for a show outfit or leisure riding. Manufacturer: Cattlemans/GVR Design: rein straps with straight backside and basket tooling Material: leather Total length: 22 cm Leather colours: russet, chestnut, dark chestnut, brown, black Concho attachment: hole provided Recommended concho diameter: 1.5 inches Package contents: 1 pair These straps are intended to replace existing waterloop ends. Before fitting them, check that the connection is compatible with your reins. The recommended concho diameter is 1.5 inches. A concho is not listed as part of the package contents, so it needs to be purchased separately if you want to use the attachment hole. Five leather colours are available, giving you options for coordinating the connectors with your Western tack. The package contains one pair of rein straps, not a complete pair of reins.
Rein straps with straight backside flower tooling
These Cattlemans/GVR rein straps replace the existing waterloop ends on your Western reins and give them a different look. The leather connectors have a straight backside with flower tooling. A hole for attaching a concho is available on request. This lets you add a matching concho to the rein ends and coordinate them with a show outfit or your leisure riding tack. Manufacturer: Cattlemans/GVR Design: rein straps with straight backside and flower tooling Material: leather Total length: 22 cm Leather colours: russet, chestnut, dark chestnut, brown and black Concho attachment: hole available on request Recommended concho diameter: 1.5 inches Package contents: 1 pair The straps are designed to replace existing waterloop ends; a complete set of reins is not included. The pair has a total length of 22 cm. If you want to use the concho attachment, note the recommended diameter of 1.5 inches. The concho itself is not included. Choose the leather colour to coordinate with the rest of your Western tack. The package contains both rein connectors as one pair.
Rope with waterloop connector
The Cattlemans/GVR rope with Waterloop connector is approximately 7.5 m long and has a Waterloop connection. It is supplied without a snap. The connection type is therefore an important point when choosing this item: if you intend to combine the rope with existing equipment, the attachment must be compatible with the Waterloop connector. A snap is not included and would need to be selected separately if required for the intended setup. Manufacturer: Cattlemans/GVR Product type: Rope with Waterloop connector Length: Approx. 7.5 m Color: Blue Connection: Waterloop Snap: Not included Package contents: 1 piece
Slobber bars basket tooling
The Cattlemans/GVR slobber bars add a decorative leather detail to your rope reins. This pair is made from Sadesa leather and finished with basket tooling. The stamped basket-weave pattern gives the pieces a traditional Western tack look, while the available leather colours make it easier to coordinate them with your existing equipment. In Western riding, slobber bars or slobber straps are also used as leather connectors in the rein-and-bit area. The stated total length is 28 cm, giving you a clear measurement to consider when selecting your tack. The package contains one pair, rather than a single piece. Four leather colours are available: russet, chestnut, dark chestnut and brown. This gives you a choice of finishes for coordinating the slobber bars with your reins and other Western equipment. Manufacturer: Cattlemans/GVR Material: Sadesa leather Tooling: Basket tooling Total length: 28 cm Contents: 1 pair Leather colours: Russet, Chestnut, Dark Chestnut, Brown
Slobber bars flower tooling
The Cattlemans/GVR slobber bars add a decorative leather detail to your rope reins. This pair is made from Sadesa leather and features flower tooling with a floral pattern. The tooling gives the pieces a distinct Western look; no additional fittings or other materials are specified in the product information. The stated total length is 28 cm. The item is supplied as one pair, so the package contains two slobber bars rather than a single piece. Four leather colours are available: russet, chestnut, dark chestnut and brown. This choice lets you coordinate the finish with your existing rope reins and other Western tack. If you are looking for slobber bars with flower tooling, this model combines Sadesa leather, a 28 cm total length and a choice of four leather colours in one pair. Manufacturer: Cattlemans/GVR Material: Sadesa leather Tooling: Flower tooling Total length: 28 cm Contents: 1 pair Leather colours: Russet, Chestnut, Dark Chestnut, Brown
Slot snap with safety lock made of brass
The Cattlemans/GVR slot snap with safety lock is a brass fitting. It has a round swivel with a diameter of 28 mm and an overall length of approximately 11 cm. These measurements refer to two different parts: 28 mm is the diameter of the round swivel, while approximately 11 cm describes the full length of the slot snap. The safety lock is part of the product design and distinguishes this fitting from a basic snap without the specified locking feature. The brass slot snap is supplied individually. If you are selecting it as a replacement or as an addition to compatible equipment, use the stated dimensions to check whether the swivel and overall length match the intended attachment point. Brass is the material. The fitting is made by Cattlemans/GVR and the package contains one piece. Manufacturer: Cattlemans/GVR Product type: Slot snap with safety lock Material: Brass Swivel: Round, 28 mm Overall length: Approx. 11 cm Package contents: 1 piece
Slot snap with swivel from polished brass
The Cattlemans/GVR slot snap with swivel is a connecting component for compatible tack and equipment. Its round swivel is specified as 1.25 inches, approximately 3.2 cm. The overall length of the snap is about 11 cm. The polished brass finish gives the metal fitting a bright, gold-coloured appearance, making it possible to coordinate this hardware visually with other brass-coloured tack fittings. The snap is supplied individually and can be selected as a separate accessory or replacement part. Before purchasing, compare the swivel size and overall length with the intended attachment point. The 1.25-inch measurement refers to the round swivel; it is not the overall length of the snap. Brass is the material. Manufacturer: Cattlemans/GVR Product type: Slot snap with round swivel Material: Brass Finish: Polished Swivel size: 1.25 inches / approx. 3.2 cm Overall length: Approx. 11 cm Package contents: 1 piece
Slot snap with swivel from stainless steel
The Cattlemans/GVR slot snap with swivel is a stainless steel fastening component. It has a round swivel measuring 1.25 inches, equivalent to approximately 3.2 cm. The overall length of the snap is approximately 12 cm. It is supplied as an individual accessory for situations where a stainless steel slot snap with a round swivel is required. This stainless steel slot snap is supplied individually. If you select it as a replacement or as an addition to your equipment, compare its dimensions with the intended attachment point beforehand. Both the overall length of the snap and the size of the round swivel are relevant when checking the fit. The product is made by Cattlemans/GVR and is supplied as one individual piece. Manufacturer: Cattlemans/GVR Product type: Slot snap with swivel Material: Stainless steel Swivel: Round, 1.25 inches / approx. 3.2 cm Overall length: Approx. 12 cm Package contents: 1 piece
Training fork premium harness leather
The Cattlemans/GVR premium harness leather training fork is a training aid used to correct a horse that tosses its head upwards. Its adjustable length allows it to be fitted within its available adjustment range. A snap hook makes it quick to attach to the ring on the saddle girth. The heavy-duty design features premium harness leather, a D-ring and stainless steel fittings. According to the manufacturer information, the leather comes from tanneries operated by AMERICAN LEATHER CO. in Kentucky, USA. It has a golden brown colour. Oils used during the tanning process are intended to help the harness leather withstand dirt, horse sweat and the demands of use. The training fork is part of Cattleman's Premium Harness Collection and is listed in a 40-inch size. Product type: Training fork for Western riding Construction: Heavy duty Material: Premium harness leather and metal fittings Fittings: D-ring and stainless steel fittings Attachment: Snap hook for the saddle-girth ring Length: Adjustable Size: 40 inches Leather colour: Golden brown Leather source according to the manufacturer: AMERICAN LEATHER CO. tanneries, Kentucky, USA
Trainingsfork sadesa leather with snap hook
The Sadesa leather training fork by Cattlemans/GVR is a training aid used to correct a horse when it tosses its head upwards. Its adjustable length allows you to adapt the fork within its available adjustment range. An integrated snap hook makes it quick to attach to the ring on the saddle girth. The training fork features stainless steel fittings combined with Sadesa leather. The product is supplied in brown and comes in a 40-inch size. Its adjustable construction allows the length to be changed as required within the intended range. Product type: Training fork for Western riding Material: Sadesa leather and stainless steel fittings Length: Adjustable Attachment: Snap hook for the saddle-girth ring Size: 40 inches Leather colour: Brown Manufacturer: Cattlemans/GVR
BITS, HEADSTALLS, REINS, and much more – Individual and stylish
This category covers important Western head equipment for training, riding and shows. The selection includes Western bits, headstalls, reins, halters and ropes, curb straps and curb chains, mouthclosers and other useful riding accessories. Depending on the intended use, fit, material, size and the combination of individual components all matter.
With a Western headstall, correct sizing and positioning on the horse's head are important. One-ear, two-ear and browband headstalls have different designs and should be selected to suit the horse. For bits, factors such as mouthpiece, width, material and construction can affect the choice. Reins should also match the headstall and the intended use.
- Western bits: different designs and materials for different requirements in training and shows
- Western headstalls: one-ear, two-ear and browband styles with different leather, buckle and concho options
- Western reins: different widths, leather types and styles to match your headstall
- Halters & Ropes: practical options for the stable, groundwork, transport and everyday handling
- Curb straps & curb chains: matching components for different headstall and bit setups
- Mouth closers: different noseband styles for specific training setups
- Accessories: components for repair, adjustment, storage and adding to your Western equipment
For replacement parts and individual components, also check the measurements and attachment method. Crown pieces, browbands, concho adapters and other replacement parts need to match the width and construction of the existing headstall. If you are unsure whether a component fits, contact us before ordering and we can clarify the size, style or compatibility.