Everything around the head
Halters & Ropes, Headstalls, Bits, Reins and much more
Baby correction bit pro-roller, short shanks
Correction bit with short shanks (baby shanks) and round port made of stainless steel and with copper rollers, which increase the horse's chewing activity. Pro-roller correction mouthpiece from Pro Stuff. Mild impact due to the short shanks.Cheek length = approx 155 mm.
Baby correction bit pro-roller, short wide shanks
The Pro Stuff Baby Correction Bit pro-roller is a Western bit with short, wide shanks and a Pro-Roller mouthpiece. The short shanks provide a mild effect. Copper rollers in the mouthpiece are intended to encourage the horse’s chewing activity. The bit is made of stainless steel and copper. Choosing the correct bit width is an important part of finding a suitable fit. This model is available in two widths: approx. 5 inches (12.7 cm) and 5¼ inches (13.5 cm). The stated cheek length is approx. 155 mm. These measurements make it easier to compare the bit with the one currently used and assess the fit for your horse. Product type: Western correction bit Design: short, wide shanks (baby shanks) Mouthpiece: Pro-Roller with copper rollers Material: stainless steel and copper Cheek length: approx. 155 mm Bit widths: approx. 5 inches (12.7 cm) and 5¼ inches (13.5 cm) Manufacturer: Pro Stuff Package contents: 1 bit
Billy Allen bit with copper inlays, long shanks
Billy Allen bit in mirror polished stainless steel with copper inlays and long shanks by Pro Stuff.Cheek length = approx 225 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Billy Allen bit with copper inlays, medium shanks
The Pro Stuff Billy Allen bit with medium shanks combines mirror-polished stainless steel with copper inlays in the mouthpiece. The shanks measure approximately 180 mm. This specification helps Western riders compare the bit by its mouthpiece design, materials and cheek length when choosing between different bit styles. The compact roller construction in the mouthpiece requires delicate workmanship at the inner pivot points. Regular use creates friction in these areas, which can lead to natural wear over time. For that reason, the bit should be checked regularly rather than relying on its appearance alone. Manufacturer: Pro Stuff Materials: mirror-polished stainless steel and copper Mouthpiece: Billy Allen design with copper inlays and a compact roller construction Shanks: medium, approximately 180 mm long Available widths: approx. 11.5 cm, 12.7 cm and 13.5 cm Important inspection note: Friction at the inner pivot points can cause natural wear, so regular tensile checks are recommended to assess stability and durability. Check the required bit width for your horse before selecting a size. Its defining material details are the copper inlays and the mirror-polished stainless steel finish, paired with medium-length shanks.
Billy Allen bit, matte finish with copper inlays, long shanks
Billy Allen bit, matte finish in stainless steel with copper inlays and long shanks by Pro Stuff.Cheek length = approx 205 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Bit cathedral, gravierte long Shanks
Show Bit cathedral made of shiny polished stainless steel without copper inlays and with engraved long aluminum shanks from Pro Stuff.Cheek length = approx 220 mm.
Bit flat spoon black steel with silver trim, long s-shanks
Black steel bit with a flat spoon mouthpiece, copper inlays, and silver-plated trim on the S-shaped shanks by Pro Stuff.Cheek length = approx. 205 mm.
Bit flat spoon brown steel dots, long shanks
Bit brown steel with flat spoon mouthpiece, copper rollers, dots and silver-plated, engraved trim on the shanks from Pro Stuff.Cheek length = approx 205 mm.
Colt breaker correction bit with copper rolls
Colt breaker correction bit with copper rolls. The Colt Breaker bits were originally designed for young horses. Today, thanks to their short, flexible shanks, they are particularly valued for daily work with already trained horses.Cheek length = approx. 140 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
Correction bit blue, medium shanks
Bit blue, stainless steel without copper with medium shanks from Pro Stuff. Blue stainless steel on the mouthpieces. Cheek length = approx 165 mm.
Correction bit cathedral brown steel silver dots, long s-shanks
Correction bit cathedral brown steel with silver-plated dots, copper inlays and long s-shanks from Pro Stuff.Check length = approx. 225 mm.
Correction bit cathedral brown steel silver dots, long shanks
Correction Bit cathedral brown steel with copper rollers, silver plated dots and engraved trim on the shanks from Pro Stuff.Cheek length = approx 220 mm.
Correction bit cathedral, long shanks
Correction bit cathedral made from shiny polished stainless steel with copper rollers and short shanks from Pro Stuff. Due to the ball-shaped suspension, the shanks are particularly flexible.Cheek length = approx 180 mm.
Correction Bit pro-roller with ball, engraved long shanks
This Pro Stuff correction bit combines a mirror-polished stainless steel mouthpiece with copper rollers and long, silver-plated engraved shanks. The ball-shaped suspension allows the shanks to move particularly flexibly. This identifies the bit as a specific version within the Pro-Roller range. Its visible features include the polished stainless steel, copper rollers in the mouthpiece and engraved silver-plated shanks. Mouthpiece: Pro-Roller design with copper rollers Materials: stainless steel and copper Finish: mirror-polished stainless steel Shanks: long, silver-plated and engraved Suspension: ball-shaped suspension for particularly flexible shanks Bit width: approx. 12.7 cm or 5 inches Cheek length: approx. 210 mm The dimensions help distinguish this model from Pro-Roller versions with shorter or medium shanks. The bit is supplied as one piece. Pro Stuff is the manufacturer.
Correction Bit pro-roller, engraved long shanks
Show correction bit in mirror polished stainless steel with copper rollers and silver plated engraved long shanks by Pro Stuff. Pro roller correction. Due to the ball-shaped suspension, the shanks are particularly flexible.Cheek length = approx. 210 mm.
Correction bit pro-roller, long shanks
The Pro Stuff pro-roller correction bit combines a mirror polished stainless steel mouthpiece with copper rollers and long shanks. The ball-shaped suspension makes the shanks particularly flexible and is one of the defining features of this version. With a width of 5" and a cheek length of approx. 180 mm, the bit has clearly specified dimensions. The copper rollers are integrated into the mouthpiece, while the polished stainless steel defines the visible finish. The long shanks distinguish this version from the shorter and medium shank options within the Pro-Roller range. This makes the mouthpiece, materials and cheek length useful points of reference when selecting the right version. Version: pro-roller correction bit with long shanks Mouthpiece: copper rollers Material: stainless steel and copper Finish: mirror polished stainless steel Suspension: ball-shaped, making the shanks particularly flexible Width: 5" Cheek length: approx. 180 mm Manufacturer: Pro Stuff Package: 1 piece
Correction bit pro-roller, medium shanks
Pro-roller correctional bit in stainless steel with copper rollers and medium shanks by Pro Stuff.Cheek length = approx 165 mm.
Correction Bit two small balls, long shanks
Stainless steel correction bit with long shanks and two small balls on the mouthpiece from Pro Stuff.Cheek length = approx 200 mm.
Don Hansen correction bit copper rollers, long shanks
Don Hansen Correction Bit made of stainless steel with copper rollers and long shanks from Pro Stuff.Cheek length = approx. 190 mm.
Don Hansen correction bit copper, long shanks
Don Hansen Correction Bit made of stainless steel with copper in the bit part and long shanks from Pro Stuff.Cheek length = approx. 195 mm.
Don Hansen correction bit satin finished, long shanks
Don Hansen Correction Bit made of satin stainless steel without copper inlays and long shanks from Pro Stuff.Cheek length = approx 190 mm
Don Hansen correction bit, long shanks
Don Hansen Correction Bit made of stainless steel without copper inlays and long shanks from Pro Stuff.Cheek length = approx. 195 mm.
High port bit brown steel silver dots, long s-shanks
High Port Bit brown steel with silver plated dots and long s-shanks from Pro Stuff. Copper High Port. Cheek length = approx. 225 mm.
Hinged Billy Allen bit, short s-shanks
Hinged Billy Allen bit stainless steel, without copper inlays and with short s-shaped shanks. It has a separate eyelet in which the chin chain can be attached Cheek length = approx 165 mm. Important note: The compact design of the roller in the mouthpiece of the B. Allen bits requires delicate workmanship at the inner pivot points. Regular use creates friction, which can lead to natural wear. The bit should therefore be regularly checked for stability and durability using tensile tests.
BITS, HEADSTALLS, REINS, and much more – Individual and stylish
This category covers important Western head equipment for training, riding and shows. The selection includes Western bits, headstalls, reins, halters and ropes, curb straps and curb chains, mouthclosers and other useful riding accessories. Depending on the intended use, fit, material, size and the combination of individual components all matter.
With a Western headstall, correct sizing and positioning on the horse's head are important. One-ear, two-ear and browband headstalls have different designs and should be selected to suit the horse. For bits, factors such as mouthpiece, width, material and construction can affect the choice. Reins should also match the headstall and the intended use.
- Western bits: different designs and materials for different requirements in training and shows
- Western headstalls: one-ear, two-ear and browband styles with different leather, buckle and concho options
- Western reins: different widths, leather types and styles to match your headstall
- Halters & Ropes: practical options for the stable, groundwork, transport and everyday handling
- Curb straps & curb chains: matching components for different headstall and bit setups
- Mouth closers: different noseband styles for specific training setups
- Accessories: components for repair, adjustment, storage and adding to your Western equipment
For replacement parts and individual components, also check the measurements and attachment method. Crown pieces, browbands, concho adapters and other replacement parts need to match the width and construction of the existing headstall. If you are unsure whether a component fits, contact us before ordering and we can clarify the size, style or compatibility.